An even more bizarre example is where a revit floor will disregard your view depth and show anyway as long as it is within an arbitrarily picked range of 4 feet of your bottom clip.
Curved column line revit not seen on other floors.
Ensure the link is loaded.
If the view range intersects the geometry of a level in your main view that level cannot be used as an underlay in the main view.
First post here and i hope i am in the right place.
The application is working as expected and as designed however a setting change will address this.
See override individual lines in an element.
To see if this is the problem toggle on the reveal hidden elements tool.
This is related to the auto detect settings for the column s analytical model and also the tolerances set in structural settings.
If not apologies in advance.
Those floors will be ignored entirely.
Ami out of luck or is there some trick i don t know yet.
See masking regions and filled regions.
It follows the below procedure.
This issue occurs because there is an incorrect view range in the main view.
If the element is part of a linked file do the following.
In the main floor level the bottom of the primary range is set to main floor with an offset of 1.
Ensure the link is visible in the view.
Getting such information is not generally as easy as just getting a location curve.
Is your grids workset opened in the project.
A slanted column on the other hand is equipped with a location curve.
See unload and reload linked models.
Verify that your grids workset display yes in the opened column.
When you tried to underlay a floor only doors and windows were visible.
For vertical columns you can derive end points via level parameters and offsets.
If you see the missing grid select it right click and choose unhide in view.
Verify that the element is not hidden by a masking region or a filled region.
I am trying to create a gap in a curved grid line but this seems beyond revit s capabilities.
If your model in place intersects the cut plane at even just one point it ll show the entire model regardless of whether or not the other parts should be seen.
Konstru will store split lines and slab shape points but represent the floor outline only.
To check click the worksets icon in the collaborate tab.
If you are using slabs with split lines and very steep angles you might want to model those floors as two floors using slap shape points.
To prevent the floor or slab from being visible in plan view you need to adjust the bottom clip so that it is more than 4 feet above the floor or slab and set the view depth so that it does not include any part of the floor or slab.
Doubly curved surfaces generated by slab shape points are not supported.
